How it goes together
Three steps with the hand tool supplied. Clear a bench or set up two trestles and follow the guide included in the carton. It takes about 30 minutes. We suggest your team assembles its first coffin before one is needed, so the steps are familiar.
1. Open and check
Open the carton and check the parts against the checklist inside. Set up a clear bench or two trestles.
2. Join the sides
Slide the interlocking side and end panels together, then fix the joints, handles and base with the wooden pegs, screws and the hand tool.
3. Fit the lid and the lining
Lay in the cotton lining, pillow and pads, then fit the two-section lid.
Watch it go together
Tools, storage and handling
- A hand tool is supplied. A cordless drill with a Torx T25 bit makes the screws quicker.
- Stores flat in a single carton (about 15 cm deep), saving floor space in your premises
- Keep the carton dry. A care and storage note is available on request.
- Plan for a two-person lift.
- The assembly guide and parts checklist come in the carton
- The PDF assembly guide is available on request under Documents
Questions about assembly?
Ask us for the assembly guide and the specification sheet.